Nixy Soap Oil – 50 L

1. Dilute the soap oil using the specified ratio. Typically, combine one part soap oil and ten parts water. Adjust the ratio to accommodate heavier or lighter cleaning tasks.
2. Apply the diluted solution to the surface with a sponge, cloth, or mop. Ensure that the area being cleaned is evenly covered.
3. For tough stains or grease, use a scrubbing brush or pad to work the solution into the surface. This will help to lift and remove the dirt.
4. Rinse the cleaned area with water to eliminate any residual soap oil or residue. Dry with a clean cloth or let the surface air dry.

1. Keep out of the reach of children and pets.
2. Do not mix with toilet cleaners or products containing acids or ammonia, as this may release dangerous gases (chlorine).
3. If it gets into the eyes, rinse thoroughly with water for 15 minutes. If irritation persists, seek medical advice.
4. For skin contact, rinse well with water.
5. If swallowed, drink a glassful of water immediately. Do not induce vomiting. Seek medical advice immediately and show this container or label.
6. Vapors may ignite explosively. Keep away from heat, sparks, open flames, and pilot lights.